Skip to main content

<subcircuit />

Overview​

A <subcircuit /> is a powerful organizational element in tscircuit that represents a collection of elements that are tightly coupled. Subcircuits are often used for a small functional block, such as a voltage regulator.

Within a subcircuit, you can have a custom autorouter or isolated nets from the larger circuits. You can also re-use reference designators. Your subcircuit is essentially isolated from other subcircuits.

export default () => (
  <board width="10mm" height="10mm">
    <subcircuit name="subcircuit1" schX={-2}>
      <resistor name="R1" resistance="1k" />
    </subcircuit>
    <subcircuit name="subcircuit2" schX={2}>
      <resistor name="R2" resistance="1k"  />
    </subcircuit>
    <trace from=".subcircuit1 .R1 .pin1" to=".subcircuit2 .R2 .pin1" />
  </board>
)
Schematic Circuit Preview

Re-using Reference Designators​

Re-using reference designators is typically considered a bad practice, but in tscircuit reference designators are intelligently prefixed prior to being written on the silkscreen. This means that you can design your subcircuits without worrying about whether or not a reference designator has been previously used.

export default () => (
  <board width="10mm" height="10mm">
    <subcircuit name="subcircuit1" schX={-2}>
      <resistor name="R1" resistance="1k" />
    </subcircuit>
    <subcircuit name="subcircuit2" schX={2}>
      <resistor name="R1" resistance="1k" />
    </subcircuit>
    <trace from=".subcircuit1 .R1 .pin1" to=".subcircuit2 .R1 .pin1" />
  </board>
)
Schematic Circuit Preview